Sensormatic Intellex Instruções de Operação descarregar pdf (Página 33)

Intellex RMS Digital Video Management System

Installation 17

OPTIONAL CONNECTIONS

Alarms

CAUTION: Protect the unit against lightning. If a portion of a cable is installed

outside of a building, the entire cable is vulnerable to lightning.

Therefore, install protection devices on all vulnerable cables.

The alarm connectors include pins for mechanical or TTL/CMOS standard alarm

inputs and outputs. Connect up to 8 alarm inputs and 8 alarm outputs (see Alarm

Connectors on page 189 for specific pin assignments and additional information.)

Video Out

The Video Out connector provides continuous live video, even during image

playback. Connect this output to the video input of an optional live monitor

(NTSC/EIA or PAL/CCIR).

Keyboard

NOTE: Adding a keyboard to the Intellex unit will provide access to certain operating

system features such as Log Off, Shut Down, and access to other

applications. This access is not controlled or limited by the Intellex Security

Option. Do not install a keyboard if you wish to restrict user access to these

operating system features.

If installing a keyboard, plug it into the keyboard connector.

Printer

Connect this output to a parallel printer that supports graphics.

Com2

Connect this input to a dome controller (Sensormatic VM16 or American Dynamics

ADTT16) using an external interconnect module (EIM). Refer to the dome controller

documentation for more information.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 237 238

Sem comentários

Sensormatic Intellex Instruções de Operação Página 33