Sensormatic Intellex Instruções de Operação descarregar pdf (Página 64)

Installation and Operating Instructions

48 Live Operation

Camera Sequencing

The unit can display cameras sequentially in any available format. Cameras display in

camera number order at the Live Display Sequencer Dwell rate (see Display Option

on page 139).

In the single-pane format, the unit displays images from each camera in camera order.

In multi-pane formats, cameras appear in their assigned locations. Cameras without

assigned locations appear sequentially in the lower right window.

NOTE: Sequencing stops when an alarm occurs. You must acknowledge the alarm

before you can start camera sequencing again. If you do nothing, sequencing

resumes as soon as the unit clears the alarm (see Alarm Operation on

page 181).

To start camera sequencing:

1. Select the screen format: 1x1, 2x2 or 3x3.

2. Click the Seq button. The unit switches cameras in the lower right window (or

full-screen) at the Live Display Sequencer Dwell rate.

To stop camera sequencing, either:

•Click the Seq button. Sequencing stops and cameras display in the previous

format.

• Click any format button (1x1, 2x2 or 3x3.). Cameras display in the appropriate

format.

• Click any camera button (1–8). The selected camera displays in the single-pane

format.

Live Monitor (Optional)

If an optional live monitor is installed, the unit displays all live images continuously

on the optional monitor. Live display commands, such as selecting a camera or a

screen format, appear immediately on the optional monitor.

Dome Controller (Optional)

If a dome controller (Sensormatic VM16 or American Dynamics ADTT16) is

connected, you can use it to display a specific camera, change the display format (1x1,

2x2, 3x3) or sequence cameras (live mode only). Refer to your dome controller

instructions for more information.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 237 238

Sem comentários

Sensormatic Intellex Instruções de Operação Página 64