Sensormatic SpeedDome Ultra IV Manual do Operador descarregar pdf (Página 45)

5-4 Operator’s Manual

ALARM NAME

AREA NAME

CAMERA NAME

PATTERN/PRESET NAME

Figure 5-3: Display Locations for Name Information

You may choose to disable displaying all name information, or you may choose to display

selected or all name information.

Changing the Display of All Name Information

1. Select On-Screen Text Display from the Dome Configuration Menu.

2. Use the Tilt control to move the highlight bar to Disable All Names?

3. Press Zoom Out or Zoom In to change the setting.

• If you want to disable the appearance of all name information, select Yes.

• If you want all or some name information to appear on the monitor, select No.

Then continue with Changing the Display of Selected Name Information on page

5-4.

The default setting is No.

4. Do one of the following:

• If you want to change the status information display, refer to Displaying or

Hiding Status Information on page 5-2.

• If you want diagnostic information to appear when the dome resets, refer to

Displaying Diagnostic Tests During Reset on page 5-6.

• If you want to assign names to the dome, areas, presets, patterns, or alarms, refer

to Assigning or Changing Name Information on page 5-7.

• If you want to change the text information appearance, refer to Changing Text

Display Attributes on page 5-10.

• If you are finished making changes, press and hold Iris Close, then press Focus

Near or Focus Far to save your changes and exit the utility.

• If you want to make changes to other settings, use the Tilt control to move the

highlight bar to Exit, then press Focus Far. The Dome Configuration Menu

appears. Continue with What To Do Next on page 5-12.

Changing the Display of Selected Name Information

When Name Configuration Menu is selected from the On-Screen Text Display screen,

the following appears:

This command is not supported with Manchester.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 75 76

Sem comentários

Sensormatic SpeedDome Ultra IV Manual do Operador Página 45