Sensormatic Intellex Guia de Resolução de Problemas descarregar pdf (Página 19)

Intellex Digital Video Management System

Quick Reference Guide 17

COM 3, COM 4 These COM ports are assigned to either the external

USB modem or the port expanders. The external USB

modem must use COM 3 or COM4 to be used with

pcAnywhere.

COM 5 This COM port is used by the internal modem if it is

installed. If there is no internal modem, it is assigned

to the port expander.

COM 6 and higher Assigned to port expanders.

Since the internal and external modems have specific port number requirements,

always install the modems before installing the port expanders. Adding the modem

later will result in reassignment of the serial port numbers. Follow this procedure:

• Install all modems. Power up the Intellex unit and allow Windows to assign COM

port numbers.

• Install the port expander(s). Allow Windows to assign serial port numbers.

• Shut down the Intellex unit and restart. The port numbers should be stable after

this.

Connecting Text Sources

Data from a text source will be recorded by Intellex if the following conditions are

met:

• The Intellex application must be able to open the COM port.

• Serial data must be present for the text stream to be listed in the playback text box.

To set up text recording on the Intellex unit follow these steps:

1. Install all desired serial devices as described above. Be sure to reboot the unit to

minimize the possibility that serial ports may be reassigned the next time the

Intellex unit starts.

2. In the Intellex application, click on Setup, then Text. Click on Add to set up a text

stream for recording.

3. Type in a name for the text stream and select a COM port. Do not select

“Unselected” or any COM port less than COM 3.

4. Set up the other serial port parameters to match the data source.

5. Click on the Camera Associations tab and select the camera(s) that will be

associated with this text stream.

NOTE: Text will only be recorded when the associated cameras are recording video.

6. Click on OK to close the window and save the settings.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 189 190

Sem comentários

Sensormatic Intellex Guia de Resolução de Problemas Página 19